diy (7)

Manual trigger with arcade button for eurorack

I wanted to create my own module for eurorack from start to finish and make my first pcb layout. This is my journey to my diy arcade trigger eurorack module.

[MISSING TRANSLATION] DerGrosseDaniel

Eurorack flight case

When you are getting into modular synthesizer and eurorack, the first thing you need is a case. You can buy one or make your own. I wanted a cool one and of cource I build my own.

[MISSING TRANSLATION] DerGrosseDaniel

Eurorack power module

I wanted a switch for my modular synthesizer and a cable I can unplug and which isn't hardwired.

[MISSING TRANSLATION] DerGrosseDaniel

3x3 midi controller

I wanted to build a small midi controller. It should be cheap, 3d-printable and with usb.

[MISSING TRANSLATION] DerGrosseDaniel

Eurorack stomp box tuner

I've got the idea that a tuner for my modular synthesizer would be nice. And the cheapest route in my mind would be to convert a guitar pedal tuner. So I bought the cheapest one I could get. When the glorious Harley Benton CPT-20 arrived at my home, the journey began...

[MISSING TRANSLATION] DerGrosseDaniel

3d printed stop motion armature

I wanted to make a stop motion armature that needed cheap materials but is ridged. So my idea was to make little 3d printed boned where i can feed aluminium wire through.

[MISSING TRANSLATION] DerGrosseDaniel

Gear 360 intervalometer

I’ve got a Gear360 2016 really cheap used from Amazon to play a little bit with it. The image quality is amazing for the price, but everybody who tried it knows that there isn’t a good way to capture images in a regular interval.

[MISSING TRANSLATION] DerGrosseDaniel