Eurorack power module
I wanted a switch for my modular synthesizer and a cable I can unplug and which isn't hardwired.
one day build (4)
3x3 midi controller
I wanted to build a small midi controller. It should be cheap, 3d-printable and with usb.
Eurorack stomp box tuner
I've got the idea that a tuner for my modular synthesizer would be nice. And the cheapest route in my mind would be to convert a guitar pedal tuner. So I bought the cheapest one I could get. When the glorious Harley Benton CPT-20 arrived at my home, the journey began...
3d printed stop motion armature
I wanted to make a stop motion armature that needed cheap materials but is ridged. So my idea was to make little 3d printed boned where i can feed aluminium wire through.