diy ⁽⁷⁾

Manual trigger with arcade button for eurorack

June 29, 2019 by DerGrosseDaniel

I wanted to create my own module for eurorack from start to finish and make my first pcb layout. This is my journey to my diy arcade trigger eurorack module.

Eurorack flight case

June 1, 2019 by DerGrosseDaniel

When you are getting into modular synthesizer and eurorack, the first thing you need is a case. You can buy one or make your own. I wanted a cool one and of cource I build my own.

Eurorack power module

May 31, 2019 by DerGrosseDaniel

I wanted a switch for my modular synthesizer and a cable I can unplug and which isn't hardwired.

3x3 midi controller

May 28, 2019 by DerGrosseDaniel

I wanted to build a small midi controller. It should be cheap, 3d-printable and with usb.

I've got the idea that a tuner for my modular synthesizer would be nice. And the cheapest route in my mind would be to convert a guitar pedal tuner. So I bought the cheapest one I could get. When the glorious Harley Benton CPT-20 arrived at my home, the journey began...

3d printed stop motion armature

September 26, 2018 by DerGrosseDaniel

I wanted to make a stop motion armature that needed cheap materials but is ridged. So my idea was to make little 3d printed boned where i can feed aluminium wire through.

Gear 360 intervalometer

September 18, 2018 by DerGrosseDaniel

I’ve got a Gear360 2016 really cheap used from Amazon to play a little bit with it. The image quality is amazing for the price, but everybody who tried it knows that there isn’t a good way to capture images in a regular interval.